How to Install Glock into mx-1

Introduction

In this tutorial, we will guide you through the correct method of inserting and removing your firearm from the MX1 chassis system. Proper installation ensures a secure fit and reliable function, while incorrect insertion can lead to improper seating. Follow these steps for a smooth and safe process.

How to Insert Your Firearm into the MX1

Step 1: Remove the Pin

1. Locate the pin at the rear of the chassis.
2. Push and remove the pin completely.

Step 2: Open the Rear Door

1. Pull the rear door of the MX1 all the way to the back.
2. This creates enough space to slide in your firearm properly.

Step 3: Position Your Firearm

1. Use your weak hand to hold the chassis pick rails to stabilize it.
2. With your strong hand, take your firearm and ensure it is parallel to the chassis.

Step 4: Insert the Firearm

1. Push the firearm straight in, making sure it remains parallel.
2. Continue pushing until you hear a click, indicating that it has locked into place.

Avoid Incorrect Insertion

❌ Do not insert the firearm at an upward angle.

• If you insert it too high and simply push forward, it will not lock in properly.
• The firearm may appear seated but won’t function correctly.

✅ Correct Method:

• Always ensure the firearm is parallel before pushing it in.
• You should hear a distinct click when it locks into position.

Step 5: Secure the Firearm

1. Close the rear door.
2. Insert the pin back into place.
3. Your firearm is now secure and ready for use.

How to Remove Your Firearm from the MX1

Step 1: Remove the Pin

1. Push the pin out completely.

Step 2: Open the Rear Door

1. Move the rear door back to release the firearm.

Step 3: Release the Firearm

1. Locate the release button on the chassis.
2. Press the button to disengage the firearm from the frame lock.

Step 4: Remove the Firearm

1. Once released, carefully pull the firearm straight out from the MX1.
2. Ensure no parts remain engaged before setting the firearm aside.

Conclusion

By following these steps, you can properly insert and remove your firearm from the MX1 chassis system with ease. Always double-check for a secure fit and ensure proper alignment to avoid issues.

Stay safe and enjoy your MX1! 🚀