Introduction
In this tutorial, we will walk you through the process of installing the correct adapter for your MX1 on a Glock 26, 27, 43, 43X, or 48. Each MX1 package includes two adapters, one designed for the Glock 26/27 and another for the Glock 43, 43X, and 48. Follow the steps below to ensure a proper installation.
What’s Included in the Package?
Inside your MX1 packaging, you will find:
- Two adapters (one for Glock 26/27, the other for Glock 43, 43X, 48)
- Three screws
- Three nuts
- Allen key
Step-by-Step Installation Guide
Step 1: Ensure Firearm Safety
Before handling the firearm, always ensure it is clear and unloaded:
- Remove the magazine.
- Pull back the slide and visually check the chamber.
- Confirm that the firearm is empty before proceeding.
Step 2: Selecting the Correct Adapter
- Identify the adapter for your specific Glock model.
- If you are installing on a Glock 43, 43X, or 48, select the corresponding adapter.
- The adapter will have stamped markings inside, indicating which side attaches to the firearm’s left and right sides.
Step 3: Attaching the Adapter
- Open the adapter to separate the two halves.
- Align the left side of the adapter with the left side of the firearm’s frame.
- Attach the right side of the adapter to the right side of the frame, ensuring a snug fit.
Step 4: Securing the Adapter with Screws and Nuts
- Insert one nut into the designated slot.
- Use the provided Allen key to tighten the screw into the nut.
- Continue tightening until the adapter is firmly secured to the frame.
Step 5: Final Check
- Verify that the adapter is securely in place.
- Ensure all functions of the firearm operate as expected.
- Confirm there are no loose parts before use.
Conclusion
You have successfully installed the adapter on your MX1! This setup ensures a proper fit and enhances your firearm’s functionality. If you have any questions, refer to the instruction manual or consult a professional for assistance.
Happy shooting, and stay safe!
